PDA

View Full Version : dynamite mega 2 charger

MeOnDrugz
03-20-2002, 03:49 PM
hi all.. im new.. and i have a mega 2 charger. it went out... the fuse holder is dead or sumthing, so i tried to fix it.. then it didnt work. does anyone else have this problem? i wanted to know if anyone came up with a way to fix it. i know their is power going through, because when the fuse holder was still their, i moved the wires a little bit, then it would show as "trickle" then when i try to start the charge, the wire would move a little bit, then wouldnt work. should i try to hard wire it? a friend told me about that, but did not give me information about it... any help is greatful...
Fafnir
03-20-2002, 03:55 PM
The fuse is there to prevent things from catching on fire if there is a short. I really wouldn't hard wire it. If possible just see if you can replace the fuse holder with another one from Radio Shack or something if that is the problem. it is always a bad idea to hard wire something.


--Chad
MeOnDrugz
03-20-2002, 04:01 PM
i dont have the original fuse for it. but on the charger itself. it says 1 amp. but do u know the watt?
MeOnDrugz
03-20-2002, 04:19 PM
i just went to radio shack (across the street.. im soo lucky) and got a fuse holder and 4 1amp 250 watt fuses.. so.. wish me luck...
MeOnDrugz
03-20-2002, 04:26 PM
ahhhhhhhh... i hooked it all up.. tried it... no luck... this is beginning to piss me off... im just going to let it "charge" for the 15 minutes.. see if anything happened... is there a possibility that the green light went out, and its not making a connection there?
MeOnDrugz
03-20-2002, 05:00 PM
does anyone have aim so i can chat with them straight on... i need help...
Fafnir
03-21-2002, 10:03 AM
Nope, don't do IM ,

are you sure the problem isn't with the connection between the battery and the charger. That is the part that should see the most wear and might be the source of the problem.

--Chad