Trinity Reflex NT

[YR4Dude]

You try Dinball for the Kyosho tank(subsitute), or you can try hkmodel for the K-Factory tank (direct replacement)

[fenix]

hi guys ¡¡¡¿
i really like my reflex ?
but is there any transponder mount for the reflex and where i need to put on my car ?
Thank you

[Blacktiger]

I have a Reflex Nt that I need to get a set of belts for as well as a new middle shaft. I found a list on rc-tech for places to get parts. Which I listed below. I checked and a few of them do have the parts I need. I also found them on Kyosho Americas website shop. Has anyone bought from any of these dealers before? Looks like most of the ones on the above list are overseas.

Just wondering on the shipping time mainly.

Also if anyone has some parts for sale for the Reflex Nt let me know.

www.dinball.com
www.rc-mushroom.com
www.precisionrc.com
http://shopping.rcmodel.hk.com
www.rchub.com
www.integy.com

[fenix]

hey the g4 belts are teh same to the reflex even the arms are too..

I have a Reflex Nt that I need to get a set of belts for as well as a new middle shaft. I found a list on rc-tech for places to get parts. Which I listed below. I checked and a few of them do have the parts I need. I also found them on Kyosho Americas website shop. Has anyone bought from any of these dealers before? Looks like most of the ones on the above list are overseas.

Just wondering on the shipping time mainly.

Also if anyone has some parts for sale for the Reflex Nt let me know.

www.dinball.com
www.rc-mushroom.com
www.precisionrc.com
http://shopping.rcmodel.hk.com
www.rchub.com
www.integy.com

[Blacktiger]

thanks for the tip fenix

[hooked_on]

Hi

I just picked up one of these cars...

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs041.snc4/34413_435301234541_539519541_5222947_1714509_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs777.snc4/67793_435301799541_539519541_5222957_3952673_n.jpg

Seems a shame to break the seals on something that has been sealed since 2001

[hdcchrome]

These are great kits, I own a couple myself. The only drawback to the kit is it is designed for a engine with a threaded crank and rear exhaust. They don't make engines like this anymore and finding one can be hard. OR you can buy a whole new clutch setup (don't know where) that would allow you to use a current engine with a SG shaft and rear exhaust which you can find anywhere.

Collari made a perfect engine for the car, which I have in mine and so did PICCO.

I have a box SOMEWHERE with 100's of parts I picked up NEW IN PACKAGE. If you guys are interested I could look for it and see if I have what you are looking for.

PM me for what you want and I will look for the box. I am pretty sure I have belts.

[hooked_on]

These are great kits, I own a couple myself. The only drawback to the kit is it is designed for a engine with a threaded crank and rear exhaust. They don't make engines like this anymore and finding one can be hard. OR you can buy a whole new clutch setup (don't know where) that would allow you to use a current engine with a SG shaft and rear exhaust which you can find anywhere.

Collari made a perfect engine for the car, which I have in mine and so did PICCO.

I have a box SOMEWHERE with 100's of parts I picked up NEW IN PACKAGE. If you guys are interested I could look for it and see if I have what you are looking for.

PM me for what you want and I will look for the box. I am pretty sure I have belts.

Thank you i will keep that in mind... I am going to try and use the two speed and clutch assembly out of the Team Magic G4 as they are the same i believe. But if i run into to trouble i will shoot you a PM!

Are you stilling running your RFX? Looking forward to starting my build tonight!

Thanks for assistance
H_O

[hdcchrome]

Oh yeah, I love it. It is my favorite car and I have run them all I think. I like it better than the serpent and the mugen. MUCH better than the mugen. The mugen is a PIECE of crap in my experiance. I actually have NEVER broken ANYTHING on the reflex. I have worn stuff out but never broken anything, it is built like a tank. It comes stock with one of the nicest chassis every made as you will find out. I found my box of parts, I will post a picture, you guys will die.

[hdcchrome]

I found my box of parts. HOLY CRAP!!! I didn't realize I had so many. There are a couple 100 parts here that I need to sort out. I don't know what all I have here, but they are all for the Relex NT. Like I said, it was always my favorite car, so I wanted to make sure I had spare parts so I stocked up.

I am willing to share what I have with you guys. I guess I should post in the for sale section by part when I get it sorted out. So stay tuned.

[hdcchrome]

Thank you i will keep that in mind... I am going to try and use the two speed and clutch assembly out of the Team Magic G4 as they are the same i believe. But if i run into to trouble i will shoot you a PM!

Are you stilling running your RFX? Looking forward to starting my build tonight!

Thanks for assistance
H_O

You mentioned the G4. Do you know anyone running that car? It is another car I stocked up on parts for but no longer have the car. I have a couple 100 K-factory and Team Magic parts I need to get rid off. SEE PICTURE I would be willing to sell the entire lot for the right price if anyone still runs this car.

[hdcchrome]

OK here is the link to the REFLEX parts. I sorted them all out. What a job, I don't ever want to type that much at one time again :)

http://forums.radiocontrolzone.com/showthread.php?t=260954

[hooked_on]

Does anyone know where i can purchase a steering servo horn/servo saver universal for all brands that will fit on the RFX?

Thanks
H_O

[hdcchrome]

I know that Kimbrough makes one that will work with the RFX. Here is a link to a couple off Tower.

FUTABA
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXS447&P=ML

HITEC
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXS362&P=ML

They make a couple more that I think fit JR and AIRTROICS too. I have used Kimbrough for years and they are SOLID!!!!

[hdcchrome]

I think the one that comes with the NT kit fits HITEC, but I would have to double check.

[hooked_on]

I know that Kimbrough makes one that will work with the RFX. Here is a link to a couple off Tower.

FUTABA
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXS447&P=ML

HITEC
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXS362&P=ML

They make a couple more that I think fit JR and AIRTROICS too. I have used Kimbrough for years and they are SOLID!!!!

Thank you, the standard servo saver is for Airtronics/JR, Hitec and Futaba both have different amount of teeth on the spline.

I have run into trouble with the clutch. I tried to use the Centex of my TM G4, but the flywheel is too small with RFX engine mount and if i use the G4 mount it rest on the alloy bracket for the belt tensioner and wont mesh with the 2 speed.

H_O

[hdcchrome]

Yeah man, that is the big draw back to this kit. THE CLUTCH!!!!!!! If you can find a rear exhaust THREADED shaft engine you have it made in the shade, but they don't make em anymore and they are a BEEEEEEEAAAAAAUUUUCH to find. Let me know how you work it all out.

[hdcchrome]

Oh, and did I fix you up on the Kimbrough?

[hooked_on]

Oh, and did I fix you up on the Kimbrough?

Yeah that was very helpful thank you!

[hooked_on]

Yeah man, that is the big draw back to this kit. THE CLUTCH!!!!!!! If you can find a rear exhaust THREADED shaft engine you have it made in the shade, but they don't make em anymore and they are a BEEEEEEEAAAAAAUUUUCH to find. Let me know how you work it all out.

I have been told that the KFactory K1146 might fit... but at $90USD i am not sure it is worth the gamble.... Think now i should have bought RDLogics Mongoose or a NTC3 again!

[hdcchrome]

The Reflex is a Killer car, the clutch is the only issue. Keep searching for a engine or a clutch solution and let me know what you find. I had a couple of these kits new in box sitting around and just finished putting one together a few weeks ago. I was lucky enough to find the perfect engine new in box off ebay, so keep an eye out on ebay for an engine. If you find a clutch solution please let me know. I have a box full of Kfactory parts, I may have a clutch. When I get back in town Monday I can look to see if I have a clutch. If I do, I will donate it to you bro just to see if it works. Keep your fingers crossed.

[hdcchrome]

So ANYONE else running or used to run the Reflex?

[hdcchrome]

I have been told that the KFactory K1146 might fit... but at $90USD i am not sure it is worth the gamble.... Think now i should have bought RDLogics Mongoose or a NTC3 again!

Let me know how you are doing.

[spiderwc]

So ANYONE else running or used to run the Reflex?

still runing my reflex. absoloutley love it and will not stop running it untill i cant find any more parts.

[hdcchrome]

still runing my reflex. absoloutley love it and will not stop running it untill i cant find any more parts.

Let me know if you need parts. I have a box full