RC-10?

[atariT3]

I have a super narrow graphite chassis, it has an associated battery tray bolted in it, and a beat-up bulkhead, tranny, and A-arm mounts all in one that bolts on the back, the bolt pattern is along the bottom. It has four holes torwards the end f the chassis like it for the motor mount or something. I think the servo goes horizontal with the servo horn pointing towards the front, not to the side like the RC-10. The front A-Arm mounts won't fit on the front like it had a special narrow front end. Does anyone think they know what this is?

[kartrun]

I could be wrong,but it sounds kinda like a custom works intimidator conversion for the rc10!!Don't quote me on it,its just a guess!! :D

[atariT3]

UPDATE: tranny is a combination of bulkhead, A-arm mounts and the tranny case. It has two internal gears, one is a large diff, looks like an older type, kinda looks like a spur gear with some outdrives parts on it and some slipper pads. It dosen't have standard outdrives but the square blocks or hook ups of telescoping drive shafts, the outer part of the telescoping drive shafts I have for the wheels to connect to. It's all white plastic right now but I'm going to dye it pretty quick. It also has a little gear on the outside of the tranny which is weird becuase it must have had either a huge pinion or another gear on it's motor mount for a reverse motor, odd.

[atariT3]

UPDATE: the gears in the tranny and the external gear are 48 pitch.

[nsane]

Kart is right, if it had reversed motor position, its probably a conversion for a rear drive dirt oval car, and again, he's proabably right that is a custom works chasis, maybe part of the sprint conversion?

[nsane]

Did I mention that makes me miss my dominator and intimidator? Sniff Sniff :)

[atariT3]

are dirt oval R/C's a blast?

[ovalnator]

Only if you have a dirt oval track around. Cant run them on an offroad track (not enough clearance) Got pics of this chassis???

[atariT3]

sorry, no pics, Web TV bites.