B3 trans clicking????

[2nd Gear]

I have taken this thing apart and cleaned everything and rebuilt it.This is happening cause when I jumped a small jump the car landed on the left side and the dog bone poped out.It looks as if the output from the trans. is tweaked alil bit,Would this make the trans click or a clicking sound period,I am thinking about getting the RRP out puts for the diff but Ill wait if anyone has some good ideas thanxs guys,Please dont bash Ive been in r/c for 3 yrs and I think I know what Im doing,But I dont want to buy anything that I dont have to the stock out drives are fine for me cause the weight thing isnt an issue.Thanx again!!

[hpiguy]

It could easily be that.

Or what happened to me is a super fine piece of rock got stuck in my spur gear. I couldn't even see it without a bright light. I took my razor knife and cleaned out each tooth and it stopped instantly.

[JoeTheShmoe]

could just be the mesh bettwen spur and pinnon. My rustler clicks all the time, and sometimes if i just loosen the motor, move it out, and move it back in it works without clicking.

[2nd Gear]

I disconnected the cvds and it didnt click but i did find out what the problem is it is the ball diff out drives,The design is different from the rustler and the spur is fine and the mesh is set correctly using a peice of paper.thanxz for the help guys.