Numbers for a Peak Spitfire

[cabbynate]

What are good numbers for a Spitfire Blueprinted stocker?? It would be going in a XXXT. Any info would help. Thanks :confused:

[cabbynate]

Rick, were are ya man??? :p

[Killer_TL01]

The one I bought hit around 24,500 rpms'. Not bad but it could be better. It can easily hit around 27-30,000 rpms with some better brushes and lighter springs. Although since you are running offroad I sugest going with a setup that gives more torque. That way you can power off the corners and still have some speed. Also you can run a taller gear ratio.

Killer_TL01

[Rick Hohwart]

You want one that is 97 to 100 watts at 20 ampsand 23000+ rpm. With these numbers you will be quite fast. You can make small changes in brushes or springs but the stock set-up is pretty good for most applications.

[cabbynate]

Thanks Rick. I got one that is 20.1amps,100watt and top rpm is 21603. That as you know is at a constant 7.00 volts.
:)

[Rick Hohwart]

That's good....The RPM is a bit low but probably not broken in all the way. So both numbers should come up.