PDA

View Full Version : Motors that Fly...


pmpnep
04-12-2001, 05:26 PM
Hey I am going to make a maonster T3 with blinding speeds(and no ones stopping me). I have a few problems and i'm open for suggestions and comments.
I needA 5 turn single
A Reversing ESC(if possible)
Gear Ratios

I am goin to rebuild the tranny with a full set Boca bearings alloy,aluminum,steel tranny gears. The MIP's are going to be rebuilt. New lightweight slipper from RRP. I am going to put RRP steel 32pitch pinion with a GT Steel spur. I know somethings bound to break. The biggest problem is a Brand who make s a motor that big. And a Reversing ESC that can handle what ever I through at it.


Or I can just skip the whole idea and put like 18 batterys with my 13 turn. I dont know whatever thats cool and fast.

gacjr0
04-12-2001, 07:50 PM
I don't know from 5 turn, but you can get 6-8 turn motors from Reedy, Peak/Orion, and T. You can stick with standard 48 pitch spurs. Go down a couple teeth from the smallest recommended pinion in your manual, and see what happens. The only reversing controller I know of that could handle that would be a Novak (Super Rooster?). It can handle 10-12 cells too. Good luck.

jrob440
04-13-2001, 12:18 AM
Check out astroflight.com for some serious speed controls (up to 36 cells) and high voltage motors.

pmpnep
04-13-2001, 09:08 PM
Thanks Guys