Plz help setup on LRP ESC.

[Drayken D]

I am in the process of installing my new LRP, 7.1 I am not sure of the best way to connect the wires. I am used to using a rooster(hope LRP is a BIG improvement), with two sets of + and - wires, for motor and battery. With the LRP, it does not have that many, I am supposed to run inline from ESC to batt to motor? Can anyone give some detail install info for this. BTW, I want to continue to use deans connectors for BOTH, the motors and batteries. Pics would be a huge help. thx.

[B3Tyler]

Ok, lemme go get an old issue of rcca.Theres a red,black and blue right? the blue goes to the negitive part of your motor, the black goes to the negitive part of you battery. The red wire, you will have to make a jumper, strip off some insulation close to the middle of the wire, and solder on a new red one. Put one on the + side of the motor, and the other to the + side of the esc. I use deans on my TC2, and my C2. The red wire goes to the + on both deans. Hope this helps :D

[Drayken D]

yep, thx. I thought thats how i should, just making sure on a $139 item, lol.