length of MIP CVD's needed for TL01

[Killer_TL01]

Well since I have been looking for some hop-ups for my project TL01R and so I thought that some CVD's would be a good hop up. The one problem I have in buying them is the fact that I dont know what length I need for the TL01 wide arm set. Thats all I need to know right now. Because I'm buying everything at one time I need the length of replacement CVD's. Thanks for any help in advance. As soon as I finish my parts list of what to buy I'll post the list. Also I need to know how to post pictures so during the project I can show some pics on how it is going.

Killer_TL01 :p :) :o :D ;) :eek: :rolleyes: :cool:

[Throtl Hapie]

Measure the length of the dogbone, and see if they have a CVD that long. I don't think they make a CVD kit for the TL01.

[Killer_TL01]

The problem is see is that I dont have the long arm set to find out the length of the CVD's needed. Thats why I'm asking so I know what length to buy before I buy the long arm set. I know they dont have a kit for the TL01 but you can order different lengths needed.

Killer_TL01

[RcMania24]

Do you know how much longer the a-arms are compared to the stock ones thats if you have gotten the kit yet.Thanks

[RcMania24]

Do you happen to know what all comes with the TLO1 Long arm set.

[RcMania24]

Well i am new too so if i get any ideas to help i will let you know and thanks for info. good luck. :)

[Killer_TL01]

No I havent bought the long arm set yet. I'm not ot sure when since I'm looking at buying a real car this summer. All I know is the the new arms will widen the TL01 to the electric TC width of 190mm. The conversion kit comes with all the parts needed to complete it. Longer arms, tierods, campber links, new steering hubs and c hub and new rear hub. It also comes with longer dogbones and probably new out put shafts. If the kit comes with the new output shafts(the shafts that hold the tires to the car) it will most likely be the same kind that came with the TG10/TB01 long arm kit and the TGR kit. They come witha splined axel with a new hex adapter to work with the axel. The good thing about that is there are now more pins to lose. My project right now stands at a sit still. Currently everything is set in stone except for the ESC. I'm thinking about getting a Novak Cyclone TC2 since it is farley new and its a Novak. I will post my parts list as soon as I get it completed.

Killer_TL01 :)
Also if you have any ideas to help me along with my project email me at rush_motorsports@yahoo.com