Don't know what the problem is.....Need Help!!!

[RcBum]

Okay, here's the problem.

My TC3 is running backwards. When i pull the trigger it stops and when the trigger is in brake position it accelerates.

I don't know what the problem is. Any help would be really helpful. Thanks

[Nairb]

Flip the throttle reversing switch on your radio or just reprogram your ESC.

[RcBum]

I tried reversing the throttle on my esc, but it just goes faster.

My esc will not program. I have a novak cyclone tc2. I held the button down to program it, but it isn't starting the programming sequence.

Is something wrong with my electronics???

[digex]

He means flipping the throttle reverse on the transmitter.

[Nairb]

You should be able to reprogram your ESC whenever you want. Make sure you're doing it right.

[RcBum]

I know. I reversed the throttle from my esc but it still isn't working?!?

and yes, i know i am following the correct procedure to program the esc. I am holding down the on/off button until the led light lights up. The problem is that the led isn't lighting up.

[ 05-14-2001: Message edited by: RcBum ]

[ 05-14-2001: Message edited by: RcBum ]

[Car_Head12]

ok, did you try flipping the servo reversing ON THE TRANSMITTER?

[Kevin_366]

not the esc...... on the transmitter, like nairb said.... flip the reversing stwitch for the throttle (on your control,the thing you hold on to)

[RcBum]

Yes, i flipped the throttle on the transmitter. It just accelerates faster when i do though.

I made a mistake before when i said i flipped it on the esc. I meant the transmitter.

[ 05-14-2001: Message edited by: RcBum ]

[Car_Head12]

hrmmmm... something sounds wrong, do you have the motor wires on correctly? is the plug in the reciever the wrong way try switching those and see what happens

Car Head

[mavrick0611]

sounds like its wired backwards. red wire to positive black to negative
aj

[R/C Homie]

u have ur wires crossed if not its the tranmiter if that doesnt work ur ESC is messed up or u dont know how to use it also when u soldered on the wires to the ESC u might have switched those be==> :cool: