!?!?!?!?!?!?!?!?!?HELP?!?!?!?!?!?!?!?!?!?!?!?!?!?

[electroman]

on my rustler i raised the rear by moving the shock all the way up to the second highest hole. now the wheels want to lock up when i let off the throttle. what did i do wrong and how can i fix it

[steveb3]

Same happened to my B3, what you do is move the camber link arm to the farest hole from the tire, than the Camber Link on the tower to teh farest left. Thios also gives you about a 3 degree toe-in. Now if you want you can move your shock anywhere withou the Dogbones (CVDs what ever) falling out. Happenes to everyone an dif it hasn't, IT WILL HAUNT YOU THE REST OF YOUR R/C RACING CAREER!

over and out,

steve

[electroman]

whats the chamber link

[Top End]

Now that the shocks are in a different position, make sure they aren't touching the tires, they might touch them just enought to stop them from spinning when they aren't under power from the motor.

[DerekB]

If you raised the ride height too high the plastic slides may be at such an angle that it causes it to bind. It may look cool to have your truck jacked up to the moon, but it may not always be the best thing to do. Lower you truck's ride height and your problem should be solved.