PDA

View Full Version : Can you convert TC3 to TC4

djbodies
04-01-2006, 02:41 AM
I was wondering, can you convert TC3 to TC4? or Can u use TC4 chassis with TC3 parts?
Grizzbob
04-01-2006, 08:11 AM
Not really, a few things are compatible, but most are not. You'd be just as well off to just buy a TC4.... :cool:
OldSkoolRCRacer
04-01-2006, 02:04 PM
NO! You cant!
If you have a TC3, just run it until the TC4's are all that beat you, then get a TC4.
highroller
04-02-2006, 01:11 AM
There was a list of parts and part numbers that were needed to upgrade the TC3 to TC4 on the Associated website.
wvuviv30
04-10-2006, 02:27 AM
There was a list of parts and part numbers that were needed to upgrade the TC3 to TC4 on the Associated website.
link me please... Associated's site is sometimes tricky to find things twice.
b16crxturbo
04-10-2006, 02:27 PM
I guess technically you could, but you would need all of the following:
Chassis
Chassis braces
Steering rack
Motor mount(the one that bolts to the chassis)
Suspension arms & mounts
Hinge pins
Hub carriers/steering knuckles
Shock towers
Body posts maybe

You can use from your TC3:
Shocks
Bearings
Diffs & cases
CVDs (they will work but are a little smaller)
Motor mount cam and upper clamp
Driveshaft

That should be the majority of things, but there might be a few other misc odds and ends. If you could find somebody that upgraded their Team car with a graphite kit, you would be able to get a good majority of the parts for cheap.