2 ?'s, about soldering and pinion

[broken_parts]

first the soldering question, i can get the sodler to stick the postive side tab on my speed gems 2 i mean it will stay but when i put the wire in it it stick to the wire and no solder on the tab????and my second ? is my pinin(15 t) on my rustler wont stay on for anything, what could be wrong????????
Thanks
B_P :confused:

[FactoryTeam Guy wannabe]

just use loc-tight on the pinion set screw.....

[B3Tyler]

Are you using Rosin core solder? And are you tinning the wire itself 2? Maybe the hole is stripped, before you buy a new one use loctite hope this help :)

[XXXER]

It is a good idea to "rough up" the motor tabs with a file, and pre-tin the tab, before soldering a wire onto it.

As for your pinion, make sure you are getting it on the flat spot on the armerature, use a good allen wrench, that is not stripped.

You should not have to use loc-tite, but you may have to.

[broken_parts]

Thanks guys a will let you know how to goes.
B_P

[JP]

TIN!!! Thats the word...Thanx RJ

[XXXER]

Who in the CRAP is RJ? I thought that was lil_general_lee.

Man, i hope you are not refering me me ;)

-Steve

[Rc1oGtMaN]

I was gonna post something about that RJ stuff too, Steve. -Mark