PDA

View Full Version : XXXT Screws?

Jason_R
06-28-2001, 10:18 PM
What size are the hex screws on the XXXT? My cheap allen wrenchs don't say their size on them and i am about to get new wrenchs and i need to know what sizes to get? Thanks

[ 06-28-2001: Message edited by: Jason_R ]
losifreak2004
06-28-2001, 10:33 PM
A 3/32" and a .050" wrench is all you need to be able to put everything together
Jason_R
06-28-2001, 10:38 PM
Thanks
XXXER
06-28-2001, 10:59 PM
You forgot the most important one, the 1/16, that is the smaller holes, the .05" is the smallest, used on the steering rod, and to put that looooong grub screw into the top shaft.
Nairb
06-29-2001, 03:45 AM
Yep, I'd say 1/16" & 3/16" are the most important ones. I hardly ever use my .050", only for building CVDs & stuff.
losifreak2004
06-29-2001, 05:24 AM
Dah, I did forget those. What was I thinking? Oh yeah, I WASN'T!!!
rcracer_xxxt_futaba
06-29-2001, 08:34 PM
What about the one in-between 1/16 and 3/32?? The one that holds your trans together. I got on and it really helped with the trans screw and the front axel on my XXX.
Nairb
07-02-2001, 03:09 AM
That's a good idea, too, Neight. That's a size 5/64" wrench. Personally, I suggest getting every tool under the sun that will make working on your cars easier, but some people feel differently...