PDA

View Full Version : AH!!!!! MY TEAM ORION CHROME RS DYNO TUNED DOESN'T WORK!!


Isky
03-24-2001, 09:32 PM
I just drove my rig today and my Team Orion Chrome Stock RS Dyno Tuned stopped working. I drive it in my T3 FT with a 20/87 ratio. I have been using it for about 3 moths with about 15 runs through it.all of a sudden(next time i started the car up) I Heard a schreeching sort of noise coming from the motor. It only happened during the low rpms.I checked my motor, but everything seems in check. The noise also occured when i pressed down on the endbell. What should I do or buy? I cant afford a new motor...i just spent my money on metal servo gears and radio.

Aussie_Man
03-24-2001, 11:04 PM
Did you make sure you oiled the bushings every run?

Aussie_Man
03-24-2001, 11:04 PM
Did you make sure you oiled the bushings every run?

broken_parts
03-24-2001, 11:15 PM
do u check for debris in the motor? sometimes it could get in there

XXXER
03-25-2001, 01:52 AM
sounds like the bushings just need to be oiled, just a drop or two on each side is enough for a while. Also, your brushes could be nasty, take them out and have a look see

Isky
03-25-2001, 09:52 AM
Hey, thanks guys...i haven't ever oiled my bushings. What should I use? Is 30wt. shock oil good? My brushes look a little shorter, but doesn't seem like it wouldmake a difference. No debris in my motor. So, what should i use to oil the brushes? Thanks for your help everyone.
- Isky

goobydoosdad
03-25-2001, 09:59 AM
They do sell motor lube oil at your LHS for that application. I use 2 cycle engine oil.