painting order

[Jato9]

I am painting a body using flaskolor and liquid mask. I was just wondering the order in which I should paint it. The colors are top: black, bottom: white, there anre going to be blue and orange graphics seperating them. This is my first body with liquid mask. I have always painted darkest first but if I do that I wont be able to see the line on the outside to cut the mask. So here is what I was thinking.

Orange then silver backing/outline
blue then silver backing/outline
black
white

What do you guys think will this work or will the black be seen though the other colors.

Thanks Jake

[adrcracing]

Blue, back with white.
Orange, back with white.
3 med. coats White backed 1 coat Silver.
Black the top and inside of the body for a finished look.

[Jato9]

Thanks adrcracing. I am still going to outline in silver so just do that after I back in white, or when I am backing the white? If this turns out good it should be a pretty nice paint job.

Thanks again
jake

[adrcracing]

I would do it after. Cut the whole design out then start painting.

[Jato9]

Thanks again. I will post pictures when I am done. How knows if it is good enough I might add it into the comp.

Jake

[Jato9]

I am not sure if this changes anything for the backing but the blue is faspearl blue and the orange is createx flouresant orange. I have the blue laid down so it wont be to long know. It is suppose to rain all day Saturday so I should be able to alot of it done.

[mproy]

I would do it after. Cut the whole design out then start painting.

adrcracing - you cut out every cut to be done before shooting? When I did cuts prior to shooting I found overspray of the wrong color sets in the crack. What's your trick?

M.P.