Water Trap for Badger compressor

[tq_racing]

Im looking for a place to get a water trap and regulator for my badger aircompressor. Any help would be great.

[Piggy89373]

Most water traps found at hardware stores should work well. Most compressors use a 3/8 inch nipple. As far as a regulator, it depends on the type of compressor. I'm not sure about the type of compressor you have. Some Paasche compressors have a needle valve type regulator. If this is the case, a standard regulator may not work too well and may give inconsistent air flow. Your best option is to drag your compressor down to your local hardware store and ask.

[tq_racing]

thank you

[Duster_360]

Take a look here - Badger trap/filter is a little ways down on this page

http://www.dixieart.com/MiscAccessories.html

[tq_racing]

hey cool thanks