Faskolor Help!

[Scomp87]

I just started a body not 3o min ago with this faskolor paint. Its new to me, and I thinned it down a bit with rubbing alcohol as advised... I shot the charcoal shadow and moved to the orange... the charcoal went down fine, but the orange ironically oprage peeled like I've never seen! What went wrong here?

[Scomp87]

Ok, so never mind. The guys at Starting Grid said I was laying it on too thick, i gues with faskolor, the first coat needs to be very very very thin. No more alcohol, using windex now :p . and the orange needs to be sprayed down there around 20 psi, black likes 35 i'm told.

[AirBoston]

For some reason I've had a lot of fish eye problems with orange too. You are right that the thinner the coat, the less the problem.

[Farwar]

Just spray your paint in light coats building up the colour as you go. Allow it to dry inbetween also. You can use a hairdryer to speed up the process.

[VelvettFogg]

I dont thin my faskolor at all. It is the same paint as Auto-Air, which is made to shoot without being thinned.

If you insist on thinning, I'd use the extender made by Auto-Air. This will help prevent the dulution of the color.