reciever glitching

[Conrad]

Nope, I tried fresh batteries and diferent crystals.

[Top End]

Make sure that the antenna isn't touching the chassis or any metal parts anywhere. Try moving the receiver to a different location if you can, or mount it on something that would insulate it from the chassis better than tape or velcro. Just to see if it is the receiver location, remove it and just set it next to the car, turn on the power and see if the servos still glitch.

Glitches are the worst! I hate em!

[Conrad]

My servos constantly glitch when the reviever pack is on with fresh batteries. This just started happening after I reinstalled the engine. When the transmitter is on the throttle servo mglitches when I turn the steering servo. Itook the reciever cover off and noticed no visible signs of water or dirt. When I touch the reciever the glitching tends to stop a litle. Any suggestions? Thanks for past help.

[Zed]

I had the same problem with a throttle servo glitch when turning the steering servo, but I resolved it by putting in fresh batteries. Maybe you used bad batch of batteries.

Zed