Brush Question

[yankees2000]

I have a P2K Pro and i am looking to replace the old brush with a new one. Should i get laydown or stand up brushes and which brushes do you think are good?

[B3 Bomb]

You should replace the brushes on the P2k with laydown (stock) brushes. Before you do that get the comm trued if you can because replacing the brushes without a trued comm will cause severe comm wear. A brush that is good for all around use would be Trinity's 4499 nt (no termenial) or the 4499. I think that is the number. http://www.rccaraction.com/ubb/smile.gif

[XXXER]

Reedy 767's and 766's are the best, then Trinity 4499, if you have WarLock Brushes where you race, get #660

[T&J 301]

Are these Reedy brushes hard on the comm and how many 4 min. runs can you expect to get out of these ?

[XXXER]

When i ran the P2K, i did not notice any more wear than with the 4499's. The 766's i have not tried, but heard they are great.

I cut my comm every 3 race days, and replace the brushes with a good thorough cleaning after every day. When i ran the 767's, i would go 2 heats, and 1 main, with 2-3 practice runs(harder on the motor than the race, i run 2400's, they last about 10 minutes, if not longer) I do notice a little, and i mean little difference with the 4499 on comm wear, but the 767's are definatley better performance

[T&J 301]

Always looking for more performance,so I will give the 767's a try and see how they do.
Thanks