Odd size bearings

[Combatcm]

I'm looking for a bearing with a 3/16"ID and a 7/16 or 11mm OD. I put B4 CVD's on a baja king and the axle is slightly smaller than 5mm, which is the ID of the stock bearings.

I suppose I could buy 3/16X3/8 bearings and shim the outer bearing to match the hub. I was thinking of using JB weld cause it can break off when needed. Any suggestions?

I might use some heat shrink tubing to get the play out, that might expand it to 5mm.

[RCMadMatt]

Could you use the B4 hub carriers on the Baja King? Just an idea. Then you could use the stock B4 bearings. Shrink wrap might work as well.

Matt

[Combatcm]

HPI part number 6115 had spacers to put 3/16 bearing inside and have the spacer make the OD 11mm.

I just bought a set, it works perfect, friction and slop free. I have 4 CVD's on my baja king now. All you need to do is shim the inside axle and thats it.