PDA

View Full Version : Snow Driving


Hammer
12-21-2000, 04:42 PM
I have a Traxxas electric Stampede what sould i do before/during/after for snow driving??? THANKS

J mAn
12-21-2000, 04:44 PM
just blow it off before the snow melts and it will be fine.

J mAn
12-21-2000, 04:46 PM
and just to be safe put a reciever cover on. kyosho makes a good one that will fit most recievers.

The_Ne-Go-She-Ate-r
12-21-2000, 05:39 PM
and set your esc high up as posible!

grandmasterofpool
12-21-2000, 05:45 PM
Get yourself some balloons and put one around your receiver and the other around your esc. Or just use sandwich baggies and tie them off with twist ties. Everything thing else should be fine as long as you clean it off as soon as your done. If you have one use an air compressor to blow it dry. Just be careful not to force water into the electrics. Also sandpaw tires are great for getting traction in the snow.

The_Ne-Go-She-Ate-r
12-21-2000, 11:22 PM
BUt if your running to hot mod a motor in your truck i dont suggest using a baloon,on your esc then becouse it gets no air running through the heat sinks.

J mAn
12-22-2000, 03:18 PM
when i'm get my e-maxx i'm going to try and seal the body too the chasis as best as posible because that's where all of the electronics are.