Bearing oil

[JoeTheShmoe]

I got some bearing oil. Where do i put it????
On the out side or the inside or where. Thanks for the help.

------------------
Project Bolinkinator:
Bolink Sport2000 chassis
Novak SuperRooster
Speedgems 10t motor
Bearings

Get the idea!!

[Throtl Hapie]

Unless you want to take apart all the bearings, just spray it on the outside it will still work well.

------------------
VV00T!

[JP]

Dont listen to TH, that only works inbetween heats. To oil your bearings, get some nitro cleaner or QD electric cleaner, or QD brake cleaner from a LHS or an auto shop or like ace hardware or something. Take both seals off the bearing (I do it with a very sharp needle and then flatten the seal with needle nose pliers) and spray the bearing, on both sides. Then put one seal back on after its dry and oil the bearing with 1-3 drops (depending on the thickness of the oil) and put the second seal back on. Then your done.

------------------
You must always push the limits. Because if you never fail, you will never succeed.

Crashing is an art of driving that goes bad in result in human or mechanical error.

Visit a Bulletin Board only site where its only R/C! Registration is free, too! http://pub24.ezboard.com/brcworld2board80996