Orion Marc Rheinard Worlds Edition motor

[StevePond]

http://www.rccaraction.com/pics/orion/ORI_rev_rhein.jpg


Team Orion proudly introduces the new Marc Rheinard Worlds Edition Revolution motor. Tested and developed by Team Orion motor guru Oscar Jansen, the Marc Rheinard Worlds Edition motor takes Revolution V2 performance to the next level with availability in February 2005!

Each motor is built according to precise specifications by master motor builder Derek Furutani at Team Orion USA and tuned with Oscar’s exclusive Worlds set-up. For maximum power delivery, each Rheinard Edition motor is equipped with sprint compound Edge brushes and new 10-coil 0.35mm Inox steel brush springs.

Available in six race developed winds (including Marc’s exact World Championship winning 7x1) with an anodized blue endbell and Rheinard Worlds Edition label, the new motor provides unsurpassed performance with the efficiency and long life that only TOP V2 technology provides.

Experience World Championship power with the Marc Rheinard Worlds Edition Revolution motor!

ORI29085 7x1 $95.00
ORI29086 8x1 $95.00
ORI29087 9x1 $95.00
ORI29088 10x1 $95.00
ORI29089 12x1 $95.00
ORI29090 12x2 $95.00

Springs:
ORI41386 10 coil 0.35mm $2.99
ORI41387 9 coil 0.35mm $2.99

[metalry101]

He won the worlds w/ a 7 turn? Geezuz...I thought the only people who ran motors that hot were crazies...like me for instance.

[Maverick Racer]

Thats really standered stuff actually. In mod oval racing I ran a 6x2 this weekend in the main that got me a 5th in the roar regionals. One of the big oval motor builders was there and had one of his guys on a 5x3. It ran really well for the first minute, but for the last three it went flat. He went back to a 7 for the main but it was fun to witness. Kinda hard to make time with that stuff, but when you can controll it, why not.

[metalry101]

Wow...that's cool I guess. I'm just impressed that today's batteries can hold their juice well enough under that kind of amp draw to make those motors usable. That's a real credit to just how far battery technology has come.

[munim]

Why does Derek Furutani sound familiar?

[tadium54]

Because it sounds like Fussili, like "Fussili Jerry!"

[Maverick Racer]

He's a super fast sedan guy, normally is in the top 10 of most all big races. He winds motors for about 70% of all motor builders that do mods, including orion, peak, fantom, redline, paradigm, some overflow for putnam, bullit... the list go's on.

[Gary Guest]

He's a super fast sedan guy, normally is in the top 10 of most all big races. He winds motors for about 70% of all motor builders that do mods, including orion, peak, fantom, redline, paradigm, some overflow for putnam, bullit... the list go's on.


Derek works at Team Orion USA and only winds motors for Team Orion and Peak Racing. He is awesome!!

[munim]

I remember now! He won the ROAR gas buggy nats in 98! Guess he got out of buggies then.

[Maverick Racer]

Derek works at Team Orion USA and only winds motors for Team Orion and Peak Racing. He is awesome!!

No he does not. I have run motors that he wound from Redline. I know for a fact that EJ has Derek wind all of his motors. I have seen other motor mfg's arms that are exactly the same. Same solder used for the wire to comm connections, same dip method for the epoxy on the arm. They were done by him.

This last weekend at the Roar region 12 race I ran a Redline motor that Derek wound for me to try in mod oval. Did some oval testing for Redline.

[Rick Hohwart]

No he does not. I have run motors that he wound from Redline. I know for a fact that EJ has Derek wind all of his motors. I have seen other motor mfg's arms that are exactly the same. Same solder used for the wire to comm connections, same dip method for the epoxy on the arm. They were done by him.

This last weekend at the Roar region 12 race I ran a Redline motor that Derek wound for me to try in mod oval. Did some oval testing for Redline.

Redline is a customer of Team Orion USA. In the past we have sold them completed armatures to sell under their own label. Team Orion has even built team and test motors for them Since Derek is an employee, there is a chance that a particular Redline motor was wound by him. but since Team Orion USA employs three full-time wonders, there is a chance it wasn't.

Team Orion (and Derek F.) does not currently wind motors for any companies except Peak Racing. As for the others, they only wish.

[Maverick Racer]

Really, who is doing overflow winding now? I though that before derek was winding for orion thats what he did and that he still was. I stand corrected.

Thats what I was running, a test motor. It was what (or at least I was told) derek had wound more specifically for oval.

I have heard from quite a few people that he was doing winding for those companies that I listed.

Thanks for clearing that up.

DW