DuraTrax Evader Pro Parts

[StevePond]

Hopping up (and keeping up) Evader models!

Evader*/Evader Pro* Hop-Up/Replacement Parts
An R/C model is only as good as the after-market support behind it...and that's where DuraTrax shines! Now owners of the popular Evader ST and BX Ready-To-Run off-roaders can choose from this extensive selection of parts to upgrade their rides to the status of Evader ST and BX Pros - and Pro owners can use these same parts to keep their model in top racing form!

Adjustable Rear Toe-In/Anti-Squat Kit
* Replaces the plastic rear chassis plate with one that's made of hard anodized 6161 T-6 aluminum.
* The rear toe-in angle can be adjusted from 0-3 degrees by using different mounting holes in the rear chassis plate.
* Spacers are included for use under the suspension mounts to adjust the anti-squat angle.
DTXC6050 Adjustable Rear Toe-In/Anti-Squat Kit


Graphite Parts Upgrade Kits for Evader ST & Evader BX
* It's all the graphite parts for the Evader ST or BX, in one convenient package.
* Spares dealers from the time and effort of identifying and ordering parts separately, while also costing less.
DTXC7977 Graphite Parts Upgrade Kit/Evader ST
DTXC7978 Graphite Parts Upgrade Kit/Evader BX


Hard Anodized Parts
Durability is greatly enhanced by replacing stock parts with more rugged, hard-anodized aluminum parts.
DTXC6619 Hinge Pin Brace Hard Anodized Evader ST
DTXC8274 Motor Plate Hard Anodized Evader ST/BX


Individual Graphite Parts
From suspension arms to shock towers, hub and braces - even the chassis itself - parts made of rigid, lightweight graphite add quality and improve performance for Evader ready-to-runs.
DTXC6297 Battery Strap Graphite Evader BX
DTXC6606 Front Brace Graphite Evader ST
DTXC6607 Front Brace Graphite Evader BX
DTXC6999 Chassis Graphite Evader ST/BX
DTXC8034 Hub Carriers Graphite Evader ST/BX
DTXC8073 Rear Hub Graphite (2) Evader ST/BX
DTXC8226 Knuckle Arm Graphite (2) Evader ST
DTXC8227 Knuckle Arm Graphite (2) Evader BX
DTXC8791 Servo Brace Graphite Evader ST/BX
DTXC9256 Shock Tower Front Graphite Evader ST
DTXC9257 Shock Tower Front Graphite Evader BX
DTXC9258 Shock Tower Rear Graphite Evader ST
DTXC9259 Shock Tower Rear Graphite Evader BX
DTXC9561 Suspension Arm Front Graphite Evader ST
DTXC9562 Suspension Arm Front Graphite Evader BX
DTXC9563 Suspension Arm Rear Graphite Evader ST
DTXC9564 Suspension Arm Rear Graphite Evader BX
DTXC9642 Transmission Brace Rear Graphite Evader BX
DTXC8894 High Rate Steering Servo Saver


Shock Piston Set
* Made of high Teflon®-content plastic.
* Set includes six different shock pistons: five feature 3 holes, with hole diameters ranging from 1mm to 1.4mm, and a blank piston for modelers who want to customize their shock pistons to fit their track conditions.
* Contains 4 shock piston trees - enough for one vehicle.
DTXC9071 Shock Piston Set


http://www.rccaraction.com/pics/duratrax/DTXhopups.jpg

[2.0dohc]

Is Duratrax going racing????????

[JDAWG53]

2.0
Sure looks like it. Those are the kind of parts found on a race vehicle. I like the shock pistons, nice touch.

[moep]

if you look reaaaaaally close, you'll see a little "billy easton" stamp on every part listed above. ;)

[2.0dohc]

if you look reaaaaaally close, you'll see a little "billy easton" stamp on every part listed above. ;)

doubtfull, they showed the pro models at some shows last year, quite a bit before little billy showed up

[metalry101]

^^^ Exactly what I was thinking. Aren't these basically replacement parts for the Pro level kits? Obviously it's a bonus that they fit the standard Evader so that people can upgrade slowly, or just the parts they need, but that's still not any different than MF2 parts or FT parts going on lower level Losi and AE kits respectively is it?

[chrisAtmaxx]

jesus loves me

[Ice Cold Cheese]

jesus loves me
-cough- Spammer! -cough-
It's a good thing that DuraTrax is going racing, afterall their Evader series is totally race-ready.