How many GWS propllers you recognized?

[GWS4CEO]

How many GWS propllers you recognized?
GWS Direct Drive propellers:
PROPELLER SIZE (in mm)
GW/EP2508(65x20), GW/EP2510(65x25)
GW/EP3020 (82x50), GW/EP4025(102x64)
GW/EP4540(114x102),GW/EP5030(127x76)
GW/EP5043(125x110),GW/EP6030(152x76)
GW/EP7035(178x89), GW/EP8040(203X102)
GW/EP9050(229X127)
Also EP1060, EP1170, EP1280 comming soon! Above props also good for 300, 400, 500, 600, 800 motor with low gear ratio system.

GWS SLOW FLY Propllers
GW/EP6050(152X125), GW/EP7060(178X152)
GW/EP8043(203X109), GW/EP8060(203X152)
GW/EP9047(228X119), GW/EP9070(228X178)
GW/EP1047(254X119), GW/EP1080(254X203)
GW/EP1147(279X119), GW/EP1180(279x203)
GW/EP1260(305x152), GW/EP1280(305x203)
GW/EP1365(330x165), GW/EP1390(330x228)
GW/EP1410(356x254), GW/EP1470(356x178)
Also EP1508, EP1512 comming soon!

All the props with computer aid desingned with my unique mathmetic formular. The performance like "LEXUS" but sold at "TOYOTA"
price. :D

GWS thanks most of the expert flyers make their choice with our props. During SWAC indoor competition, I saw alomost 70~80% flyers used GWS props! :)

Try to ask GWS propellers from you local favorite dealers. If not avalible try from those professinal Indoor RC supplyers.

Not enough size? Let me know, if necessary, GWS will consider to make one! :D

[mike nill]

hows about makin a prop for the tiny pager motors so they could be used in ultra light indoor models 44g. and under. that would be great since there so light and use such little power.ive tryed to make some but they only produce mabe 4gs. of thrust

[pease1]

I would like if the GWS props were just a little thicker where the blades connect to the hub. They are good props, but they break too easilly at that spot.

I would like a 10"x6" prop too

Thanks,
Allan

[GWS4CEO]

Correction:

GWS large size SLOW FLY propellers new size is

EP1575 and EP1510 instead of the size I post beofre!:D

Houng-wen Lin / President of GWS