PDA

View Full Version : GWS R4P receiver new JST version weight 3.0g when use 1/2m lighten ant


GWS4CEO
09-01-2001, 02:33 PM
GWS make R4P receiver with JST connector version with lighten ant.

It will be 3.6g full size 1M ant can fly at outdoor aproximate 1000feet useable range.

You also can cut ant to be 50cm, the weight will be brough down as light as 3.0g only to fly indoor with 500feet usable range.

GWS R4P receiver should be one of the best among this size and weight. This receiver was ditributed even better market share in Europe, since it is the first on in this size which can past 10Khz channel narrow band seperation. That you may fly together with many others without risk like some other light receivers which need 50~80Khz channel spacing.

GWS always try to make RC easy & affordable. Pls keep inform us what your dreams, let's make it to be true together!

Kingjamez
09-03-2001, 02:36 PM
Very very nice, for my ultra light applications I've been removing the pins and soldering direct from the regular GWS R4P and have been able to get them down to 3.0 grams, a JST version will make mu life much easier THANKS!

-Jim

epilotdk
09-03-2001, 03:16 PM
Any chance of making a receiver that will power magnetic actuators? There is a demand for a system at reasonable cost, I'm sure. This will allow us to make models with less than 2oz. weight.

Michael :rolleyes:

GWS4CEO
09-03-2001, 04:49 PM
Dear Jim,

GWS not only make R4P with JST pin, the Pico servos also avalibe to be come with JST connector & silm light weight wire, the weight actually less than 5.4g! :D If, any one who concern weight, this will be great choice without extra cost! :)

GWS always listen to user's opinions. I am RC model flyer too! :p When I was teen, I sent my opinions to Japanese "BIG" companies, Nobody listen to me! :mad: My personal feeling is that if you don't care flyers demand, you never make right products which they dream on! I believe that most modelers are very romantics, with so many dreams expect to be realized, wasn't it? :D GWS makes RC products by my passsion in love with RC modeling, how lucky I am a boss of GWS! ;)

30 years ago, during my teen, I flew RC together with a few American soldiers who stationed in Taiwan. They taught me so many about RC basic, such a warm feelings never been forgotten. In GWS, we will not ignore any flyers opinion. You are not only a GWS's products user, we treat you as a friend who are in the other part of wrold while with same interest! :)

GWS4CEO
09-03-2001, 04:55 PM
Dear Michael,

GWS is wroking on such kind system too, but will better than what you have seen! :D

We will continiously design RC system better, easy and less cost. :)